With
the
dimensional
stability
of
solid
wood
and
appearance
and
sleekness
of
plywood,
Royale
Touche
Blockboard
gives
you
warp-free
furniture
that
lasts
a
lifetime.
BWP Grade
Gurjan, 100% Pine Timber and selected Hardwood species
Both Side Gurjan (Diptocarpus spp.)
100% Pine Timber Double Line
Board frame made with 100% Kiln Seasoned Pine timber.
2400 X 1220mm, 2140 X1220mm
Up to + 2 to 4 mm of specified length
Up to + 1 to 3 mm of specified width
Full Thickness (As per specified on the sheet)
0.30 MM
Both Sides Calibrated
High Solid BWP Grade Phenolic Polymer Adhesive
Four-stage preservative treatment.
0.20%
0.20%
600 TO 650 Kg/m3
< 3 %
< 5%
-- 7%-10%
No delamination after 72 hours of boiling test.
EXCELLENT
= >6000
= > 60
= > 190
= > 110
SMART CHOICE: KNOW YOUR PRODUCT | |||
BLOCK BOARD QUALITY | Royalé Touché | OTHER BRANDS | NON-BRANDED |
---|---|---|---|
BATON LAYER | 100% Pine (Single Species) | Mixed Species like Pine, Poplar | Low Quality Mixed Species |
DUAL CORE ON BOTH SIDES | Select Few Products | ||
PRESERVATIVE TREATMENT FOR BORER & TERMITE | 4 Stages | 2 Stages | Single Stage |
VACUUM PRESSURE TREATMENT ALL OF VENEERS | |||
BOILING WATERPROOF FOR ALL PRODUCTS | Limited Products | Very Few Products | |
GURJAN FACE | Select Few Products | ||
CALIBRATED | Select Few Products | Non-Calibrated | |
E0 FORMALDEHYDE EMISSION COMPLIANCE | Select Few Products |
YouTube
FREQUENTLY ASKED QUESTIONS
Q : What is plywood used for?
A : Plywood is an extremely versatile building material, and it can be used in a variety of applications, based on a variety of factors such as reinforcement and decorative surfaces. Due to its strength and cost, it is often used in interior and exterior building applications, from things like wooden furniture to interior cladding.
Q : What if the plywood gets wet?
A : Most BWP plywood boards will resist the harmful effects of raw water, and stronger woods are better equipped to manage prolonged water damage and film-coated plywood is an example. Like most timber, even if it is waterproof plywood, prolonged exposure to moisture will start to wear and damage the wood. Untreated pieces will also not hold for long, and warping and rotting will start much faster over time.
A : Although plywood sheet can be bent, it should be specialized, as most other plywood will crumble and break if they are bent. The best plywood available for flexing should have grain close together so that the surface does not separate during bending. Near-vein hardwood surfaces are ideal, including plywood made from eucalyptus
Q : Can the plywood be sanded and polished?
A : Plywood can be sanded and polished. However, like any other wood, it is important to use the right equipment to ensure that the finish appears as desired. Individuals should start with 80-grit sandpaper to flatten the base surface before moving on to finer grinding for a smoother and more vivid polish on the wood.
Q : How thick is the plywood?
A : The thickness of the plywood varies depending on what pieces are being used. If plywood is being used as a support, it needs to be thicker and stiffer than if it were being used as veneer. Conventional plywood thickness can vary up to 6 mm to 19 mm as much as a quarter of an inch. Specialized plywood grades can come in more varieties when it comes to their thickness.